Trend PH/JIG/AK Pro Pocket Hole Jig for Timber and Plywood (12.7mm - 38mm)
The Trend Pro Pocket Hole Jig is the tool to have for fast and accurate joining of timber and plywood giving strong instant joints. With a variable height adjustment for different thicknesses of timber. The heavy duty aluminium body and solid metal bushes with give consistent long life drilling. Fitted with a dust spout connector for extraction systems. Suited to Mitre Corner joints, T Joints, Square Corner Joints, Edge to Edge Joints, Post and Rail Joints and curved Joints. The jig can be used both fixed to a bench or portable depending on the application. The most common position is screwed to a bench with the material clamped into the Jig. Comes in a Carry Case with 100 various sized screws accessories and clamp.
Features:
- Adjustable height to allow material from 12.7mm to 38mm to be jointed
- Solid hardened bushes with fixed pitch of 30mm
- Use on timber, MDF, plywood and blockboard
- Workpiece support and end stop
- Allows a variety of joints to be created individually
- Quick and easy drill bit depth setting turret
- Dust extraction spout
- Square drive self tapping screws for use with a No.2 square drive bit to resist slipping (cam out)
Contains:
- 10 x No.7 x 25mm (1 inch) coarse
- 30 x No.7 x 30mm (1-1/4 inch) fine
- 30 x No.7/8 x 30mm (1-1/4 inch) coarse
- 10 x No.8 x 38mm (1-1/2 inch) coarse
- 10 x No.8 x 50mm (2 inch) coarse
- 10 x No.8 x 63mm (2-1/2 inch) coarse
- 1 x Face clamp
- 1 x HSS drill bit with collar
- 1 x 150mm Square drive bit
- 1 x Hex key 3mm A/F
- 2 x Workpiece support
- 1 x Carry case
Specification:
- Material thickness min.: 12.7 mm
- Material thickness max.: 38 mm
- Material width min.: 38 mm
- Hole pitch: 30 mm
- Drill diameter: 9.5 mm
- Square drive bit size: No.2
- Dust spout ID: 30 mm
- Underside T slot: 12.2/8.4mm x 6mm