Trend CRB 7-Function Combination Router Base
A must for any tradesman doing router jobs, the CRB Combination Router Base from Trend is a multi-function, quick-change device designed for attaching to many routers and is able to:
- Increase the overall versatility of the router
- Improve the quality of finish of every routing pass
- Reduce the possibility of error
- Increase stability during routing
- Increase the level of precision achieved
- Save set up time between tasks
- Save space on storing hand made jigs
- The CRB has seven functions:
- - an offset baseplate
- - router compass from 19mm to 224mm radius
- - adjustable trenching with a clamp guide with 40mm micro adjustment
- - adjustable anti-tilt support
- - adjustable mortising of timber from 50mm to 200mm width
- - adjustable false panel groove copier
- - enhances the Varijig frame system as an anti-tilt device when used with routers that can accept Euro style guide bushes (a special guide bush part number: GB40/B is required)
- The CRB will fit most routers with two 8mm, 10mm and 12mm fence rod holes at centres of 78mm to 130mm
- An accessory quick fit edge trimming base is available for trimming lipping up to 16mm wide and 6mm projection, part number: CRB/TB
- Larger circles can be accommodated by using accessory extension rods - part number: N/COMPASS/AEX to increase the radius by 560mm
Comes with:
- 1 x Plastic baseplate with handle
- 1 x Bridge
- 2 x Rods 8mm dia x 270mm
- 1 x Bridge shim pack (2x2mm, 1x2mm, 1x1mm, 1x0.5mm)
- 1 x Scale
- 1 x Pivot pin
- 1 x Pair of mortise pillars
Specification:
- Rod size 8 mm
- Rod centres 78 mm to 130 mm
- Mortising width min. 50 mm
- Mortising width max. 200 mm
- Anti-tilt height max. 80 mm
- Anti-tilt height min. 8 mm
- Lateral adjustment of 110 mm
- Micro adjustment 40 mm
- One revolution 1.25 mm
- Circle dimensions using 6.35mm cutter and measured from the outside edge of hole:
- Circle radius min. 19 mm
- Circle diameter min. 38 mm
- Circle radius max. 224 mm
- Circle diameter max. 448 mm
- Length 285 mm
- Width 175 mm
- Thickness 5 mm
- Cutter diameter max. possible 40 mm. Please refer to router manufacturers specification
- Net Weight: 1.196kg