Trend COMBI66 Worktop Jig (500-650mm) Peninsular complete with location bushes and length stop.
This Trend worktop jig is manufactured to enable all 1/2 inch shank plunge routers to cut accurate butt & scribe joints in postform workstops. Customers have found this product very easy to use and handle.
Features:
- Machined from hardwearing solid laminate
- Will produce a joint in 15 minutes including setting-up time
- Out-of-square joints can be accommodated
- Facilities to cut various widths of board and thicknesses up to 42mm
- Integral panel bolt connector recessing template with easy spanner access
- Width setting stop for accurate positioning
- Supplied with clear & comprehensive instructions for use
- A single male and female template in 16mm solid laminate
- Facility to join boards from 500mm to 650mm wide
- Two bolt recess slot for connecting bolts
- Three alloy location bushes & width setting stop
- Cuts out of square joints (max. 3 degree)
- Jig requires:
- A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts
- A template guide bush with 30mm outside diameter
- A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length
- Two 100mm (4 inch) throat clamps
Comes with:
- 3 x Location Bushes
- 1 x Length Stop
Specification:
- Length: 880mm
- Width: 233mm
- Thickness: 16mm
- Weight: 3.63kg