Makita SP6000J Plunge Cut Saw 165mm complete with Connector Case, Hex Wrench and Carbide-Tipped Saw Blade
Professional circular saw with plunge cutting facility which can perform an impressive 56mm depth of cut. With a contoured comfort grip. Can be used in conjunction with its guide rail (not supplied) to acheive perfectly straight cuts with no need to use additional and awkward straight edges with clamps. This saw is very easy to use. With a Tip-Resistant design and a Depth Stopper for splinter-free cutting. Also boasts Variable Speed Trigger, Constant Speed Under Load, Electronic Brake, Soft Start and is Double Insulated for safety.
Features:
- Close to wall cutting - Can perform a cut only 18mm away from the wall
- Depth Stopper for splinter free cutting - enables a preliminary cut at a depth of 2mm
- Tip Resistant Design - sliding the lever prevents this tool from falling down towards blade case
- Non-Slip Rubberised Handles - contoured comfort grips handle reduce user fatigue during prolonged use
- Connectable to a vacuum cleaner - keep workplace free from airborne dust particles. Sawdust ejection backwards for comfortable operation
- Easy Blade Replacement Design - Lever locks blade in replacement position, hex wrench can be used through hole in casing and is stored afterwards in the handle
Comes with:
- Hex wrench
- Carbide tipped blade
- Connector carry case
Specification:
- Net weight: 4.2 kg
- Bore Diameter: 20mm
- Input wattage: 1300 w
- Noise K factor: 3 dB(A)
- Blade Diameter: 165mm
- Depth of Cut @ 45°: 39mm
- Vibration K factor: 1.5 m/sec_
- Noise sound power: 102 dB(A)
- Noise sound pressure: 91 dB(A)
- Bevel Cut Range: 1 - 48 Degrees
- No Load Speed: 2000 - 5200 rpm
- Vibration: Cutting Chipboard: 2.5 m/sec_
- 56mm max cut @ 90° / 40mm max cut @ 45° / 38mm @ 48°
SKU: MAK-SP6000J-240V
