Makita DTM51 Multi-tool with DC18RC Charger in Makpac Case with Dust Extraction and Accessories (2 x 3.0Ah Batteries)
This eXclusive Toolstop deal consists of the DTM51 Multi-tool, DC18RC single charger and 2 BL1830B 3.0Ah Batteries all stored in a Makpac Connector Case Type 3. With up to 20,000 oscillations per minute the DTM51 has a high operational efficiency which enables it to cut through most materials with ease. With a multi-angle setting that spans a full 360 degrees in 30 degree increments this versatile multi-tool will cut plasterboard, wood, metal, ceramic tiles and can flush cut nails and metal pipework. Change the blade for the sanding plate and you can sand or polish with it too. Compatible with all OIS Accessories (Oscillating Interface Systems).
DTM51 Features:
- Tool-less accessory clamp for quick installation and replacement
- 12 angle setting of accessories at every 30°from 0° to 360°
- Variable speed control by dial
- Battery capacity warning lamp Blinking red; Battery power has been nearly used up. Solid red; Battery power has been
used up (Battery protector will shut off the power.) - Anti-restart function prevents accidental start-up
- Accepts OIS- Makita, Bosch & Fein accessories
BL1830B Features:
- Lightweight and shock-absorbing
- Delivers 430% more working capacity during it's lifetime compared to Ni-Cad and is 40% Lighter than Ni-MH
- Minimal depletion of power during use or in storage over it's lifetime
- Foam cell technology
- Slide on battery
- Firm holding with multi contacts and shock absorbing pack
- Will not puncture and remains cool even in heavy use
- Reaches full charge in 30 minutes or less
- Integrated L.E.D. Battery charge level indicator allows user to monitor battery charge
DC18RC Features:
- The DC18RC has a cooling fan and Active 3 Controls
- This means that during the loading of the charging voltage, charging current, and temperature is held in the holes
- The cooling system blows cool air into the battery
- As a result, high temperatures occur in the battery, so that the battery life is extended, and the charging process is accelerated
Comes With:
- Makita 821551-8 Makpac Connector Case Type 3
- 8376718 Case Inlay
- 196765-1 Dust extraction System
- TMA006 Blade for Wood and Metal
- Sanding attachment
- 5 x 60 grit sandpaper
- 5 x 80 grit sandpaper
- 5 x 120 grit sandpaper
- 5 x 180 grit sandpaper
Specification:
DTM51:
- Oscillations per minute 6,000-20,000rpm
- Oscillation 3.2°
- Overall dimensions 324mm
- Voltage 18V
- Vibration K factor: 1.5 m/sec_
- Vibration: Sanding: 3.0 m/sec_
- Vibration: Scraping: 5.5 m/sec_
- Vibration: Plunge Saw Blade: 7.0 m/sec_
- Vibration: Segmential Saw Blade: 4.5 m/sec_
- Net weight 1.9kg
BL1830B:
- Battery Ah: 3.0 Ah
- Battery Type: Li-ion
- Voltage: 18V
DC18RC Compatible with the following battery models:
- BL1850 (196673-6) 5Ah - 45 Minutes
- BL1840 (196399-0) 4Ah - 36 Minutes
- BL1830 (194204-5) 3Ah - 22 Minutes
- BL1430 (194065-3) 3Ah - 22 Minutes
- BL1415 (194558-0) 1.3Ah - 15 Minutes
SKU: DEAL-00261
