The metal gearbox on this Makita brushless combi drill provides greater runtime and higher efficiency
The Makita DHP481 Combi Drill is equipped with XPT (eXtreme Protection Technology) and a brushless motor which enhances the runtime of the drill. Delivering 125Nm of Max lock torque for unbeatable power and 0-31,500 IPM for fast hammer drilling in masonry materials. XPT is a protective seal inside the tool engineered to provide improved water resistance by channelling water and dust from the tool’s key internal components. For use in outdoor applications or harsh environments. The machine is sold as a Body Only model without battery or charger in a cardboard box.
DHP481 Features:
- Single sleeve keyless chuck allows for easy bit installation and removal with 1 hand
- Torque setting ring - wider torque range of 1-10Nm in clutch mode allows for versatile applications
- Mechanical 2 speed gearing
- Variable speed trigger
- All metal gear construction for extra high transmission durability
- Twin LED job light with afterglow
- Long rigid side handle helps stabilise the bit for steady drilling or screwdriving
- In order to provide maximum thrust to the bit, the top back of the handle is ergonomically contoured and widened to perfectly fit the U-shape formed between user's thumb and index finger
- Battery fuel gauge - The power remaining in the battery (not included) is indicated with the push of a button - 3 lights on : more than 50% of full battery capacity, 2 lights on : 20% to 50% of full battery capacity, 1 light on : less than 20% of full battery capacity
- Ribbed soft grip enables all finger tips to hold the handle securely against the strong rotational force of counter torque even in single handed operation
Comes With:
- Long rigid side handle
- Depth stop
- Belt hook
Specification:
DHP481:
- Chuck Capacity: 1.5 - 13 mm
- Blows per Minute (Hi) - ipm: 0 - 31,500 ipm
- Blows per Minute (Lo) - ipm: 0 - 8,250 ipm
- No Load Speed (Hi): 0 - 2100 rpm
- No Load Speed (Lo): 0 - 550 rpm
- Voltage: 18 v
- Max. in wood: 76 mm
- Max. in masonry: 16 mm
- Max. in steel: 13 mm
- Torque Settings: 21 + drill
- Max. fastening torque (soft joint): 60Nm
- Max. fastening torque (hard joint): 115Nm
- Lock torque: 125Nm
- Maximum output: 640w
- Battery Type: Lithium-ion
- Vibration K factor: 1.5 m/sec
SKU: MAK-DHP481Z
Additional Information:
false