The Draper 98425 Oscillating Spindle and Belt Sander has a 0-45 degree tilting table
The Draper 98425 Oscillating Spindle and Belt Sander has a double configuration with fast, easy changing between spindle sander and belt sander. Dual rotating and vertically oscillating action for fast sanding and improved work rate with reduced chance of burn. The aluminium table tilts 0-45 degrees for easy chamfering and edge work. Maximum versatility and work rate with both intricate, shaped and standard workpieces. Powerful 450W induction motor. Vented throat plates and under-table dust extraction channel. Bench mounted or freestanding operation. Non-latching safety on/off no-volt switch with dust cover. On-board storage for all accessories. Supplied with 100 x 610mm 80 grit sanding belt, sleeves, drums, wrench and throat plates.
Features:
- No-volt switch
- 0-45 degree tilting table
- 38mm dust extraction facility
- Sanding belt, sleeves, drums, wrench and throat plates included
Comes with:
- 3x Throat plates
- 4x Spindle drums
- 1x Spindle wrench
- 1x Sanding belt (80 grit)
- 5x Sanding sleeves - 13, 19, 25, 38 and 51mm
Specifcations:
- Tilt: 0-45°
- Power: 450W
- Voltage: 240V
- Weight: 12.9kg
- Belt size: 610x 100mm
- Oscillating stroke: 16mm
- Table size: 430 x 410mm
- No load speed: 2000rpm
- Tilting section: 220 x 410mm
- Dimensions: 330 x 390 x 450mm
- Sanding sleeves size: 13-51mm diameter (x 5 sizes) x 110mm
SKU: DRA-98425
